It is designed to detect and indicate when the required pressure level has been reached in an industrial pneumatic or vacuum system.

The specified sensing range for this model is -100-1000kPa / -14.5-145psi. The sensor should only be used within its published operating range.

This model uses a normally open switching function. The electrical contact changes state when the configured pressure threshold is reached.

This model uses a 6mm Stem process connection. Confirm thread type, stem style and installation dimensions before ordering.

The electrical connection is See technical specifications. Wiring should follow the applicable product diagram and the requirements of the connected control system.

Typical uses include confirming vacuum pickup, monitoring compressed-air pressure, machine interlocks, end-of-cycle confirmation, leak detection and signalling a PLC when a preset level has been achieved.

The sensor provides an electrical switching or analog signal. A PLC, relay, controller or other suitable interface normally uses that signal to control valves, alarms or machine functions.