It is designed to detect and indicate when the required pressure level has been reached in an industrial pneumatic or vacuum system.

The specified sensing range for this model is 0-100kPa / 0-145psi. The sensor should only be used within its published operating range.

This model provides a Analog Output 1-5V signal that varies with the measured pressure level for use by a PLC, controller or monitoring device.

This model uses a 1/8 Male Thread process connection. Confirm thread type, stem style and installation dimensions before ordering.

The electrical connection is 3m 9ft Cable. Wiring should follow the applicable product diagram and the requirements of the connected control system.

Typical uses include confirming vacuum pickup, monitoring compressed-air pressure, machine interlocks, end-of-cycle confirmation, leak detection and signalling a PLC when a preset level has been achieved.

The sensor provides an electrical switching or analog signal. A PLC, relay, controller or other suitable interface normally uses that signal to control valves, alarms or machine functions.