Menu
Your Cart

AP10V-01-F3-C

AP10V-01-F3-C
Please Contact
AP10V-01-F3-C

AP10V-01-F3-C Vacuum Switch Sensor

Adsens AP10 Vacuum Switch Sensor, -101.3-0kPa / -29.9-0 inHg, Analog Output 1-5V, 1/8 Male Thread, BSPP G, M8, 3-Pin Male Connector., Analog Output 1-5V, 1/8 Male Thread, BSPP G, M8, 3-Pin Male Connector

The Adsens AP10 vacuum switch sensor is designed to detect and indicate when a selected vacuum level has been reached in pneumatic automation, machine control and process monitoring applications.

-101.3-0kPa / -29.9-0 inHgSensing Range
Analog Output 1-5VOutput / Function
1/8 Male ThreadProcess Connection
M8, 3-Pin Male ConnectorElectrical Connection

Technical Specifications

SpecificationDetails
Product TypeVacuum Switch Sensor
Part NumberADS AP10V-01-F3-C
Product NameAP10V-01-F3-C
Sensing Range-101.3-0kPa / -29.9-0 inHg
Output / Switching FunctionAnalog Output 1-5V
Process Connection1/8 Male Thread
Connection ConfigurationBSPP G
Electrical ConnectionM8, 3-Pin Male Connector
ServiceIndustrial vacuum sensing and level confirmation
HTS Code9026.20.4000

Sensor Operation

The sensor monitors the applied pressure or vacuum level and produces an electrical response when the configured threshold or measured value is reached. This allows a machine controller to verify that the required condition exists before continuing the operating sequence.

Typical Applications

  • Vacuum pickup confirmation in automated handling systems
  • Compressed-air pressure monitoring
  • PLC and machine interlock signalling
  • Leak detection and pressure-loss monitoring
  • End-of-cycle and process confirmation
  • Industrial automation and OEM machinery

Important: Confirm the sensing range, output type, process connection and electrical connection before ordering. Do not exceed the published pressure or vacuum limits, and follow the product wiring diagram during installation.

Frequently Asked Questions

What does the AP10V-01-F3-C detect?

It detects and indicates when the required vacuum level has been reached in an industrial pneumatic or vacuum system.

What is the sensing range?

The specified sensing range for this model is -101.3-0kPa / -29.9-0 inHg. Operate the sensor only within its published range.

What output does this sensor provide?

This model provides a Analog Output 1-5V signal. Confirm compatibility with the PLC, relay, controller or monitoring device before installation.

What process connection does this model use?

This model uses a 1/8 Male Thread process connection with a BSPP G configuration. Confirm the connection type and installation dimensions before ordering.

How is the sensor electrically connected?

The electrical connection is M8, 3-Pin Male Connector. Wiring should follow the applicable product diagram and the requirements of the connected control system.

Where are pressure and vacuum sensors commonly used?

Typical applications include confirming vacuum pickup, monitoring compressed-air pressure, machine interlocks, end-of-cycle confirmation, leak detection and signalling a PLC when a preset level has been achieved.

Does this sensor directly control a pneumatic device?

The sensor provides an electrical switching or analog signal. A PLC, relay, controller or other suitable interface normally uses that signal to control valves, alarms or machine functions.

Link to Pneuforce Data Sheets
Please Login or Register to review
Please Login or Register to review
Ships from Los Angeles, USA
List Price $84.90 each
  • Stock: Please Contact
Add to Cart
Buy Now Question about this product?
Add to Wish List Compare this Product