It detects and indicates when the required vacuum level has been reached in an industrial pneumatic or vacuum system.

The specified sensing range for this model is -101.3-0 kPa / -29.9-0 inHg. Operate the sensor only within its published range.

This model provides a PNP Output signal. Confirm compatibility with the PLC, relay, controller or monitoring device before installation.

This model uses a 1/4 inch Stem process connection with a Male Stem configuration. Confirm the connection type and installation dimensions before ordering.

The electrical connection is M8, 3-Pin Male Connector. Wiring should follow the applicable product diagram and the requirements of the connected control system.

Typical applications include confirming vacuum pickup, monitoring compressed-air pressure, machine interlocks, end-of-cycle confirmation, leak detection and signalling a PLC when a preset level has been achieved.

The sensor provides an electrical switching or analog signal. A PLC, relay, controller or other suitable interface normally uses that signal to control valves, alarms or machine functions.