Menu
Your Cart

AP30C03-F2

AP30C03-F2
Please Contact
AP30C03-F2

AP30C03-F2 Pressure Switch Sensor

Adsens AP30 Compound Switch Sensor, -100.0-100.0 kPa / -14.50-14.50 psi, 2 x PNP + 1 Analog, 1/8 Male Thread, NPT, 3m 9ft Cable., 2 x PNP + 1 Analog, 1/8 Male Thread, NPT, 3m 9ft Cable

The Adsens pressure switch sensor is designed to detect and indicate when a selected pressure level has been reached in pneumatic automation, machine control and process monitoring applications.

-100.0-100.0 kPa / -14.50-14.50 psiSensing Range
See technical specificationsOutput / Function
1/8 Male ThreadProcess Connection
3m 9ft CableElectrical Connection

Technical Specifications

SpecificationDetails
Product TypePressure Switch Sensor
Part NumberADS AP30C03-F2
Product NameAP30C03-F2
Sensing Range-100.0-100.0 kPa / -14.50-14.50 psi
Output / Switching FunctionSee technical specifications
Process Connection1/8 Male Thread
Connection ConfigurationNPT
Electrical Connection3m 9ft Cable
ServiceIndustrial pressure sensing and level confirmation
HTS Code9026.20.4000

Sensor Operation

The sensor monitors the applied pressure or vacuum level and produces an electrical response when the configured threshold or measured value is reached. This allows a machine controller to verify that the required condition exists before continuing the operating sequence.

Typical Applications

  • Vacuum pickup confirmation in automated handling systems
  • Compressed-air pressure monitoring
  • PLC and machine interlock signalling
  • Leak detection and pressure-loss monitoring
  • End-of-cycle and process confirmation
  • Industrial automation and OEM machinery

Important: Confirm the sensing range, output type, process connection and electrical connection before ordering. Do not exceed the published pressure or vacuum limits, and follow the product wiring diagram during installation.

Frequently Asked Questions

What does the AP30C03-F2 detect?

It detects and indicates when the required pressure level has been reached in an industrial pneumatic or vacuum system.

What is the sensing range?

The specified sensing range for this model is -100.0-100.0 kPa / -14.50-14.50 psi. Operate the sensor only within its published range.

What output does this sensor provide?

This model uses a See technical specifications switching function. The electrical state changes when the selected threshold is reached.

What process connection does this model use?

This model uses a 1/8 Male Thread process connection with a NPT configuration. Confirm the connection type and installation dimensions before ordering.

How is the sensor electrically connected?

The electrical connection is 3m 9ft Cable. Wiring should follow the applicable product diagram and the requirements of the connected control system.

Where are pressure and vacuum sensors commonly used?

Typical applications include confirming vacuum pickup, monitoring compressed-air pressure, machine interlocks, end-of-cycle confirmation, leak detection and signalling a PLC when a preset level has been achieved.

Does this sensor directly control a pneumatic device?

The sensor provides an electrical switching or analog signal. A PLC, relay, controller or other suitable interface normally uses that signal to control valves, alarms or machine functions.

Link to Pneuforce Data Sheets
Please Login or Register to review
Please Login or Register to review
Ships from Los Angeles, USA
List Price $140.56 each
  • Stock: Please Contact
Add to Cart
Buy Now Question about this product?
Add to Wish List Compare this Product