VFB40CSG identifies a Vacuforce 43mm single bellows cup. The material designation -CSG refers to bright-green conductive silicone. The -CSG material is bright-green conductive silicone designed for handling electronic components. Electrical resistance and suitability for an ESD control programme must be verified for the actual assembly.

This model is supplied in bright green.

Typical uses include Electronic components and sensitive assembly handling, Automated transfer of suitable electronic housings and components. Confirm surface sealing, process conditions, cycle rate and handling orientation by testing.

The listed cup diameter is 43mm (1.693in). Match the fitting to the Vacuforce cup series and mounting bore; a shared nominal size is not proof of mounting compatibility.

At the page calculation condition of approximately 24inHg (80% vacuum), the existing estimate is 11.6kg / 26.5lb before any safety factor. This assumes ideal sealing and must not be treated as a certified working load.

No. Compare actual lip diameter, bellows geometry, mounting interface, material and working conditions before selecting a fit-form-function alternative. Confirm performance by application testing.

This cup uses conductive silicone for electronic-component handling; no surface-resistance or ESD certification figure is stated in this listing. Verify electrical properties, grounding and ESD process requirements before use.

Yes. Use an appropriate engineering safety factor; Vacuforce normally recommends at least 8:1 for vertical lifting. Account for leakage, part acceleration, load orientation and surface condition, and validate safe working load in the application.