The tube connection is sized for 8mm outside-diameter tubing. Match the actual tubing OD, not its nominal internal diameter.

To anchor the tubing connection at a machine panel and provide a female threaded connection on the other side.

No. Panel mounting and sealing the pneumatic connection are separate functions. Use the specified seal at the mating threaded connection.

PMF08-G01 has a female G1/8 BSPP connection. Match it to the corresponding male-threaded component; the push-to-connect side accepts 8mm tubing.

The P-Series fitting family is described for industrial compressed-air and vacuum service. Confirm that the tubing, O-rings and pressure or vacuum conditions are appropriate for the complete system.

Isolate pressure or vacuum first. Depress the release collar fully and pull the tube straight out. The Click-Click feel and sound are associated with depressing the collar during tube release, not with inserting the tube. Cut the tube end square before reconnecting.

The fitting body is nickel-plated brass, with the sealing and gripping components stated in the technical specification table.

No potable-water approval is stated for this P-Series fitting. Use a product with documentation explicitly covering the required drinking-water standards rather than assuming pneumatic fittings are certified.