Menu
Your Cart

SOF60X120N-45-RA

SOF60X120N-45-RA
SOF60X120N-45-RA
Please Call
SOF60X120N-45-RA
SOF60X120N-45-RA
SOF60X120N-45-RA

60x120mm Oval Flat Suction Cup 45 Shore A NBR quick release connector

This Vacuforce suction cup is designed for industrial vacuum handling. Suction Cup Oval Flat 60X120mm 45 durometer NBR rubber quick release connector

This Vacuforce suction cup is designed for industrial vacuum pick-and-place applications where reliable sealing, repeatable gripping and appropriate cup geometry are important.

51.42kgTheoretical Lift at 80% Vacuum
113.4lbTheoretical Lift at 24"Hg
SOF60X120N-45-RAModel
Vacuum Suction CupProduct Family
IndustrialApplication

Technical Specifications

HTS Code4016.99.6050

Selection & Application Guidance

Select suction cups according to product shape, surface condition, material, cup geometry, acceleration, orientation and available vacuum. Theoretical holding force should always be reduced by an appropriate engineering safety factor before determining the working load.

Product Features & Existing Technical Details

  • Automotive steel stamping
  • Temperature Range -40C to +120C / -40F to +248F
  • Glass handling
  • Plywood transfer
  • Handling of oily steel surfaces
  • Concave and convex surfaces
  • Large box & carton handling

Typical Applications

  • Industrial vacuum pick-and-place
  • Packaging and material handling
  • Machine automation and robotic end-of-arm tooling

Important: Product suitability depends on the actual operating conditions. Confirm dimensions, connections, material compatibility, vacuum or pressure requirements, cycle conditions and any required safety factor before final machine integration.

Estimated Lifting Force at 24"Hg

Theoretical lifting force is calculated from the oval cup's obround (racetrack) sealing area at 80% vacuum. The obround area combines the center rectangle with the two semicircular ends. Imperial lifting force is converted directly from the metric result so both values use the same Vacuforce calculation convention.

64.27cm²Nominal Sealing Area
51.42kgTheoretical Lift at 80% Vacuum
113.4lbTheoretical Lift at 24"Hg
60mm × 120mm OvalNominal Cup Geometry

Lifting Force Calculation

Calculation StepMetricImperial
Nominal AreaObround area = (12mm - 6mm) × 6mm + π × (30mm)² = 64.27cm²64.27cm² ÷ 6.4516 = 9.96in²
Vacuum Level80% vacuum24"Hg / 11.76 PSI differential
Estimated Theoretical Lift64.27 × 0.8 = 51.42kg51.42 × 2.2046 = 113.4lb

Important: Lifting force is theoretical and must not be used as the final working load without an appropriate engineering safety factor. Actual holding force depends on vacuum level, surface condition, porosity, cup orientation, acceleration, leakage and dynamic loading.

Frequently Asked Questions

What should I consider when selecting this suction cup?

Consider cup geometry, product shape, surface condition, material, vacuum level, acceleration, orientation and required safety factor.

Is the listed lifting force the safe working load?

No. Any theoretical lifting-force value must be reduced using an appropriate engineering safety factor and validated under actual application conditions.

Can this cup be used on porous materials?

Performance on porous materials depends on leakage and available vacuum flow. Application testing may be required, and a higher-flow vacuum source or a different handling method may be more appropriate.

How should I confirm material compatibility?

Confirm the cup compound against product temperature, surface finish, chemical exposure and any marking or contamination restrictions.

Link to Pneuforce Data Sheets 
Please Login or Register to review
Please Login or Register to review
Ships from Indianapolis, USA
List Price $75.27 each
  • Stock: Please Call
Add to Cart
Buy Now Question about this product?
Add to Wish List Compare this Product
This product has a minimum quantity of 25