The tube connection is sized for 5/32" outside-diameter tubing. Match the actual tubing OD, not its nominal internal diameter.

This model connects 5/32" tubing to a corresponding female threaded pneumatic component in a compact straight layout.

This is a straight stud connection. Choose a swivel elbow when the tube requires angled orientation at a threaded port.

The fitting uses a 1/8 NPT male pipe thread. Select the matching NPT female port and an appropriate thread seal; do not treat it as a BSPP parallel thread.

The P-Series fitting family is described for industrial compressed-air and vacuum service. Confirm that the tubing, O-rings and pressure or vacuum conditions are appropriate for the complete system.

Isolate pressure or vacuum first. Depress the release collar fully and pull the tube straight out. The Click-Click feel and sound are associated with depressing the collar during tube release, not with inserting the tube. Cut the tube end square before reconnecting.

The fitting body is nickel-plated brass, with the sealing and gripping components stated in the technical specification table.

No potable-water approval is stated for this P-Series fitting. Use a product with documentation explicitly covering the required drinking-water standards rather than assuming pneumatic fittings are certified.