Pneuforce N3V410-15-24VDC is a 3/2 solenoid directional valve. Three-port, two-position switching is commonly used for single-acting actuators, pilot circuits and air signals. Verify the required normal-flow condition before installation.

The primary port designation on this model is 1/2 NPT. Some multiport valves use different exhaust-port dimensions; consult the full product data before selecting fittings.

3/2 means two switching positions and 3 ports. It describes the directional flow-path arrangement, not pipe thread size.

Common applications include single-acting cylinders, pneumatic pilots and air signal switching; normally-open or normally-closed behaviour must match the specific circuit.

This exact model is specified for 24VDC. Match the coil rating to the control supply and check the connection type and duty rating.

A single-solenoid version typically returns by spring when de-energised; a double-solenoid two-position version can retain the last commanded spool state. Check the actual schematic and valve construction.