No. The union tee joins three push-to-connect tubing ends without requiring a threaded machine port.

BPE06 is specified for 6 mm outside-diameter tubing at its tube connections. Do not substitute a different outside diameter based only on nominal tube naming.

Choose a union tee to branch an existing tube run. Choose a threaded tee when the branch must connect directly to a valve, cylinder or manifold port.

Yes. A tee divides the available supply between branches; pressure drop depends on tube length, diameter, demand and the upstream source. Check the circuit rather than assuming both branches receive unlimited flow.

The published all-metal B-Series range is specified for compressed air and vacuum service, subject to compatible tubing, proper sealing and the limits of the assembled system. Other fluids need separate compatibility confirmation.

The published fitting-family limits extend from full vacuum to 176 psi (12 bar, as listed for the fitting family), with a fitting temperature range of -40 to +248 °F (-40 to +120 °C). Actual system limits also depend on tubing, seals and installation; do not treat these as fluid-compatibility certifications.