B1.5-16ST

OBSOLETE PART

B1.5-16ST

16mm Single Bellows FDA Compliant White Silicone Vacuum Suction Cup

The B1.5-16ST is a 16mm single-bellows suction cup for small-part vacuum handling. The bellows provides limited height compensation and compliance for parts that are slightly uneven, concave or convex.

This model is superseded by VFB15-2ST. The lifting values below are theoretical calculations at 24"Hg / approximately 80% vacuum.

16mmCup Diameter

1.6kgTheoretical Lift at 80%

3.7lbTheoretical Lift at 24"Hg

FDA Compliant White SiliconeCup Material

Technical Specifications

Specification	Details
Part Number	B1.5-16ST
Product Type	Single bellows vacuum suction cup
Cup Diameter	16mm / 0.630"
Material	FDA Compliant White Silicone
Replacement Model	VFB15-2ST
Metric Cup Area	2.01cm²
Imperial Cup Area	0.31in²
Theoretical Lift at 80% Vacuum	1.6kg / 3.7lb
Connection	Push-on / pull-off fitting connection
HTS Code	3926.90.9890

Estimated Lifting Force at 24"Hg

Theoretical lifting force is calculated from suction area and effective pressure. Actual working load must be reduced by the appropriate engineering safety factor.

2.01cm²Metric cup area

0.31in²Imperial cup area

1.6kgMetric theoretical lift

3.7lbImperial theoretical lift

Important: Theoretical lifting force is not a safe working load. Actual capacity depends on vacuum level, seal quality, surface porosity, acceleration, orientation and application conditions.

Typical Applications

Small package pick-and-place
Plastic plate and carton handling
Concave and convex parts
Applications needing limited height compensation
General automated vacuum handling

Silicone Material Guidance

White silicone is suitable for many food-related and clean handling environments where the material is appropriate. Silicone should not be used on products that will later be painted, or on decorative glass or stone where silicone transfer may be undesirable.

Drop-In Replacement / Cross Reference

Frequently Asked Questions

How much can this 16mm cup lift at 24"Hg?

The theoretical calculated lifting force is approximately 1.6kg / 3.7lb before applying a safety factor.

Why use a single bellows cup?

The bellows adds compliance and limited height compensation, helping the cup adapt to small variations in part position or surface geometry.

Is this model still current?

No. The source product data lists VFB15-2ST as the superseding suction cup.

Do I need a safety factor?

Yes. The calculated force is theoretical and must be reduced using a safety factor appropriate to load orientation, acceleration, surface condition and risk.

Please Login or Register to review

Ships from Indianapolis, USA

List Price $5.90 each

Stock: OBSOLETE PART

Qty

Add to Cart

Buy Now Question about this product?

Add to Wish List Compare this Product

Tags: 10.01.06.00099, 23.016.016.2, B1.5-16-SIT, VCC-B-063-S, SB16-SIT, VSA16SIT5, FGA 16 SI-55 N016

Venturi and Generators

Suction Cups

Suction Cups

Vacuum Filters

Vacuum Valves

Grippers Categories

Push In Fittings

Tubing Categories

Flow Controls

Pneuforce Filter Regulator Lubricators

Pneuforce Pneumatic Valves

Mufflers & Silencers

Switches Categories

B1.5-16ST

16mm Single Bellows FDA Compliant White Silicone Vacuum Suction Cup

Technical Specifications

Estimated Lifting Force at 24"Hg

Typical Applications

Silicone Material Guidance

Drop-In Replacement / Cross Reference

Frequently Asked Questions

Ships from Indianapolis, USA

Suitable for Food and Drug Applications

Customers Also Bought These Products

Ships from Indianapolis, USA

Ships from Indianapolis, USA

Ships from Indianapolis, USA

Ships from Indianapolis, USA

Ships from Indianapolis, USA

About Us

Customer Service

My Account