Menu
Your Cart

HGS-M6X28

HGS-M6X28
Please Call
HGS-M6X28

Vacuforce HGS-M6X28 Mounting Bolt – HGS VK Vacuum Generator

The Vacuforce HGS-M6X28 is an M6 threaded mounting bolt, 28 mm long, used to support and secure the compatible HGS VK vacuum generator. It provides an alternative to the standard L-bracket mounting arrangement when fitting the generator to a machine or end-of-arm tooling structure.

M6Metric Thread
28 mmBolt Length
HGS VKGenerator Series
Mounting HardwareNot a Vacuum Generator

Purpose and Mounting Arrangement

This component is a mechanical mount for the corresponding Vacuforce HGS VK vacuum generator. Its purpose is to hold the generator in position within industrial automation equipment. It does not generate vacuum, require a compressed-air supply, or replace the generator itself.

The mounting-bolt arrangement provides an option where a direct threaded fixing is more suitable than the standard L-bracket. Before installation, check that the support structure and available clearance can accommodate the M6 x 28 mm bolt and the generator.

Technical Specifications

SpecificationDetails
ModelHGS-M6X28
Component TypeVacuum generator mounting bolt
Compatible GeneratorVacuforce HGS VK
Metric ThreadM6
Bolt Length28 mm
Mounting ArrangementAlternative to standard L-bracket mount

Installation Considerations

  • Confirm compatibility with the Vacuforce HGS VK vacuum generator.
  • Verify the M6 metric thread and 28 mm bolt length against the required mounting arrangement.
  • Choose a rigid supporting structure and ensure the generator is held securely without obstructing its pneumatic and vacuum connections.
  • Use the applicable Vacuforce HGS product documentation to check the complete generator installation arrangement.

Important: This item is mounting hardware for a vacuum generator; it is not a vacuum cartridge or venturi ejector. Confirm the mounting details for the specific generator before installation.

Frequently Asked Questions

What is the purpose of the HGS-M6X28 mounting bolt?

It provides a mounting method for securing the Vacuforce HGS VK vacuum generator to a suitable machine or tooling structure. This is support hardware, not a venturi or vacuum-producing component.

What does M6X28 mean?

The designation specifies an M6 metric thread and a bolt length of 28 mm. Check the available mounting space and the generator mounting arrangement before ordering.

Which Vacuforce vacuum generator is this mount for?

This mounting bolt is listed for the Vacuforce HGS VK vacuum generator. Select the mounting part that corresponds to your generator model.

Is this an alternative to the L-bracket mount?

Yes. The mounting-bolt option can be used instead of the standard L-bracket mounting arrangement where the machine design permits it. Confirm the mounting interface and secure fixing arrangement.

Link to Pneuforce Data Sheets 
Please Login or Register to review
Please Login or Register to review
Ships from Indianapolis, USA
$8.15 each
  • Stock: Please Call
Add to Cart
Buy Now Question about this product?
Add to Wish List Compare this Product
Tags: HGS,