At 24"Hg, or approximately 80% vacuum, the estimated theoretical lifting force is 15.7 kg / 35.8 lb before applying an engineering safety factor.

The 50mm diameter equals 1.969 inches, giving an area of approximately 3.04 square inches. At 80% vacuum, the effective pressure is 14.7 PSI x 0.8 = 11.76 PSI. Therefore, 3.04 - 11.76 = 35.8 lb.

The cup diameter is converted into suction area in square centimeters. For this cup, the area is approximately 19.6 cm². At 80% vacuum, the theoretical lifting force is 19.6 x 0.8 = 15.7 kg.

This style of suction cup is best suited to non-porous or lightly textured materials. Porous materials may require a higher-flow vacuum source, a different suction cup style, or application testing to confirm reliable holding force. Foam grippers are typically used for larger surface contact and variable product sizes, not simply because a material is porous.

Yes. The calculated force is theoretical. Use an appropriate safety factor based on the load orientation, acceleration, surface condition, vacuum level, leakage and risk of injury or product damage.