Menu
Your Cart

N2W350/400/500-COIL-110VAC-J

N2W350/400/500-COIL-110VAC-J
N2W350/400/500-COIL-110VAC-J

N2W350/400/500-COIL-110VAC-J | 110VAC Replacement Process Valve Coil

This 110VAC replacement solenoid coil fits Pneuforce N2W brass and N2S stainless steel process valves in the 350, 400 and 500 body-size group. The matching DIN Form A electrical connector is included; this item is a spare coil, not a complete valve.

Replace a failed or damaged matching coil without replacing the metal valve body, provided the valve mechanism and seals are serviceable. Check body size, coil supply voltage, connector style and original part number before ordering.

110VACElectrical supply
350-500Supported body group
N2W / N2SCompatible valve series
DIN Form AConnector included

Technical Specifications

SpecificationDetails
Replacement Part NumberN2W350/400/500-COIL-110VAC-J
Product TypeReplacement solenoid coil with DIN Form A connector
Coil Supply110VAC
Compatible Valve SeriesPneuforce N2W brass and N2S stainless steel process valves
Compatible Body Sizes350, 400 and 500
ConnectorDIN 43650 Form A; included
Supplied ItemCoil and connector only; valve body and seal kit not included

When to Replace the Solenoid Coil

In automated process-water, compressed-air and vacuum equipment, a replacement coil can restore the electrical actuation of an otherwise serviceable valve. A faulty coil may produce a valve that no longer responds to a correct control signal. First verify supply voltage, wiring, connector condition and the valve mechanism; a leaking diaphragm or blocked flow passage is not fixed by changing the coil.

Valve Repair and Spare-Parts Selection

  • Use this coil only with a matching 110VAC supply and the specified 350, 400 and 500 body-size group.
  • The same documented coil family serves the N2W brass and N2S stainless process valve assemblies.
  • Use the correct diaphragm or seal kit instead when the mechanical seat is leaking or damaged.
  • Before service, isolate power, depressurize or safely vent the line, and follow site lockout procedures.
Important: Do not energize a loose coil removed from its valve assembly. Coil heating and equipment damage can result. Do not substitute AC and DC coil variants; match the valve body size and supply voltage exactly.

Frequently Asked Questions

Which Pneuforce valve models accept N2W350/400/500-COIL-110VAC-J?

The series datasheet lists this coil for N2W and N2S valves in body sizes 350, 400 and 500. Verify the complete valve part number and the coil dimensions before ordering.

Is N2W350/400/500-COIL-110VAC-J a complete solenoid valve?

No. This is an electrical replacement coil and DIN connector. The brass or stainless valve body, diaphragm and fluid connections are not included.

Does the replacement coil include the DIN electrical connector?

Yes. The matching DIN Form A connector is included with this replacement coil.

Can I use a different voltage instead of 110VAC?

No. Select the coil that matches the actual control-circuit supply. This part requires 110VAC; AC and DC coils are not interchangeable merely because they fit a similar valve body.

Will changing the coil stop a water or vacuum leak?

Only if the leak is caused by failed electrical actuation and the valve internals are otherwise sound. A damaged diaphragm, contaminated seat or incorrect seal material requires separate mechanical inspection and repair.

Can the coil be replaced in a commercial or domestic installation?

Replacement is possible on correctly identified equipment, but qualified personnel should isolate electrical power and process pressure and meet the applicable wiring and plumbing requirements.

What is the difference between a replacement coil and a diaphragm seal kit?

The coil generates the magnetic force used to operate the valve. The diaphragm and seals are wetted mechanical parts that establish the flow path and shutoff. They correct different failure modes.

Coil compatibility reference: Pneuforce N2W/N2S technical datasheet.

Link to Pneuforce Data Sheets
Please Login or Register to review
Please Login or Register to review
Order received by 14.00EST ship same day
Ships from Indianapolis, USA
$60.00 each
10 or more $54.00 each
50 or more $48.00 each
100 or more $42.00 each
  • Stock: 30